officier impérial

[darkjedi]

Pas besoin de MP, voici les infos concernant le costume d'officier ( désolé, c'est en anglais :? )

IMPERIAL OFFICER

An Imperial Officer must have the following:

- Standard Imperial Issue* belt.

- Standard Imperial Issue boots.

Trousers:
- Jodhpur (calvary) style; however, straight-legged trousers have been deemed canon if worn with black, non-textured, conservative-heeled shoes
- The material for the trousers should match that of the tunic; the color should also match the tunic except if the tunic is Cream/Off-White for Intelligence Officers. In this case, black trousers would be worn.
Tunic:
- Black (Imperial Army), Cream/Off-White (Intelligence Officer), Field Grey (Imperial Navy), Olive or Grey/Green (Imperial Navy), Red, or White fabric which should be tended for making fine suits
- Closing of the front "flap" should be along the right side
- Olive (Gray/Green) color can be closely matched to DMC Floss #646 or Coats & Clark "Smoke"
- The Grand Admiral's tunic (white with white trousers) is accompanied by gold shoulder boards
Fabric:
- The fabric for constructing the tunic and pants should be type intended for making fine suits. It should noted however that the fabric should not be too thin, which would result in excess puckering and wrinkling
*Greeblie:
- Constructed from 3 silver metal rings each raised approximately 3 mm from the other
- Ring #1 (base) approximately 24.5 mm
- Ring #2 (middle) approximately 18.9 mm
- Ring #3 (top) approximately 13.0 mm
NOTE: There are 2 Civil War-type patterns that are commonly used - Simplicity's #7274 (out of print) and McCall's M4745. Both of those need major alterations to make an Imperial Officer's uniform.

Approved Options
If straight-legged pants are being worn, black non-textured, plain (no elaborate lacing or buckles) dress shoes are acceptable

An Imperial Officer should have the following:
(These are recommended, but not required)

Code Cylinders:
- Radiation Dosimeters & RAF Pen lights were used in the film; however, metal chalk holders can be used with the tops painted blue
Hat:
- Black or Olive (Gray/Green) in color
- Imperial issues disk positioned in the center, approximately 2/3 the way up in height
Rank Bar (worn over left breast):
- Constructed from a thin, horizontally brushed aluminum sheet
- Bar dimensions: 1 1/8" height, length is determined by chosen rank
- Rank squares should be red, blue, or yellow in color, and should painting be required, paint for stained glass
- Rank square dimensions: 1/2" width x 3/4" height; each square should be spaced about 1/4" from the other
- Rank squares should also be constructed from a translucent, though not opaque material including: lighted button covers, acrylic, Plexiglas

An Imperial Officer may have the following:
(These are optional. They are accepted, but not required)

- Gloves- Black, leather or leather-like, enclosed fingered, non-textured, wrist-length and fitted as seen throughout Episodes IV-VI
- Holster- Black or Brown as seen in Episode IV
- Belt Boxes- as seen in Episode IV
- Imperial Issued Weapon- E-11, DH-17, DH-44
- White Undershirt- Worn underneath the tunic via Grand Moff Tarkin in Episode IV

The following costume modifications are encouraged:

Enfin, concernant les bottes, il faut surtout eviter l'aspect plastiques des bottes bas de gamme d'équitation :wink: