E11 ANH......

[The5thHorseman]

Je précise que désormais pour toutes validation niveau deux ou trois d'un costume de stormtrooper, les lignes d'impression apparentes sur le blaster sont interdites. Donc en l'état tes blasters ne sont valables que pour une validation de base.

"CRL:
E-11 Blaster
- Based on a real or replica Sterling sub-machine gun, scratch-built, or a modified commercial toy Stormtrooper blaster.

OPTIONAL Level two certification (if applicable):
- Folding stock (does not need to function).
- A real or replica ammo counter - based off of a Hengstler counter - shall be present.
- D-ring mounted on the rear.
- Sterling based blasters have the correct M-38 or M-19 style scope.
- Two power cylinders on the magazine housing.
- Scratch-built or cast blasters shall have a total of 6 T-tracks on blaster (leaving the lowest row on the magazine housing side uncovered).
- If using the Hasbro E11 toy blaster, it is modified to have the correct number of T-tracks (6 total), with a lower row of open vent holes on the magazine housing side. This is accomplished by covering the pre-existing rows of holes with T-tracks, then grinding off the lower integrated T-track on the magazine housing side, and drilling a new row of holes in its place.
- 3-D printed blasters can not contain visible print lines, and must be sanded smooth for a more realistic appearance.
- No ESB/ROTJ greeblies are allowed on the blaster.

OPTIONAL Level three certification (if applicable):
- Bapty-style, Hasbro and Rubies blasters are not allowed, even conversions.
- The blaster may have minor weathering or base metal exposure however, T-tracks and grips shall have the appearance of black plastic."