Blackhole / Shadow Stormtrooper
02-09-2009, 00:35
Oyez,
Je travaille actuellement sur le casque noir (comme le Lord du même nom). Je l'ai emmené chez le dentiste et maintenant il a des carries :o Il a ensuite été momifié pour recevoir l'onction finale :twisted:
![[Image: casquet.jpg]](http://img8.imageshack.us/img8/5359/casquet.jpg)
Je crois que l'on peut peindre en métal argent les dents non (comme sur le MR mini helmet) ? Ou est-on obligé de peindre en gris brillant pour la validation?
Une petite confirmation de la couleur serait la bienvenue. J'ai été voir sur le site des Special Ops TX et c'est marqué ceci :
Je retiens cela :
Je travaille actuellement sur le casque noir (comme le Lord du même nom). Je l'ai emmené chez le dentiste et maintenant il a des carries :o Il a ensuite été momifié pour recevoir l'onction finale :twisted:
Je crois que l'on peut peindre en métal argent les dents non (comme sur le MR mini helmet) ? Ou est-on obligé de peindre en gris brillant pour la validation?
Une petite confirmation de la couleur serait la bienvenue. J'ai été voir sur le site des Special Ops TX et c'est marqué ceci :
Citation :Stealth Trooper/Lumiya's Trooper/Black Hole Trooper/Shadow Stormtrooper CRL Standard
A Stealth Trooper MUST have the following:
- Black, glossy professional-quality Stormtrooper armor (made of solid or painted ABS, HIPS, Styrene, or Fiberglass). If converted from a white TK, no white may ever show on the armor.
- Silver, battleship grey (exact match of helmet stickers), or black helmet frown. Cheek tube stripes may only be black or very dark navy blue. Crown indents may be battleship grey or black. Earcap vertical stripes may be black, grey, or dark navy blue
- Opaque flat or bubbled helmet lenses, colored either black, smoke, silver, or dark green. A spectator must not be able to see your eyes through the helmet when worn.
- Matte black TK-style neckseal
- Plain Black Gloves (preferrably leather, but may be rubber or Jersey-style cloth). No ornamental/decorative stitching is permitted
- Solid black or dark navy blue undersuit, either one-piece or two piece. Non-textured, non-shiny material, but wide vertical ribbing is permitted. Commonly used items include dive suits, “UnderArmor” or “Starter” warm-up suits, or dance unitards
- Black "Chelsea-style" ankle high, laceless, non-ornamentally stitched boots. Boots may be leather or vinyl preferrably with small U-shaped elastic sections on either side of the ankle and up to a 1” heel. They must closely match the TK standard, but be glossy black vs. white
- Blaster. May be an E-11 or BFG. MG34 (DLT19), Lewis Gun (T21), or MG15 (unnamed in SW galaxy). These weapons may be a modified toy blaster (i.e. Hasbro), scratch-built, resin cast, hyperfirm rubber cast, vaccum-formed, MR, or real demilitarized guns. Blaster may (preferrably) be weathered and must never be able to fire any projectile
- E11 holster worn only when an E11 is carried. When a BFG is carried, TD-style ammo pouches are highly recommended. No thermal detonator or belt dropboxes are worn when BFG and ammo pouch is equipped (per TD specs)
- Four “teeth” cut out and backed with black screen on either side of helmet “frown”
- Thermal Detonator
OPTIONAL Stealth Trooper Modifications (Accepted, but not at all required)
- Rank Pauldron (Black, Grey, Orange, or White) Made from vinyl or leather. Blue or red is NOT an acceptable color.
- Black leather, Vinyl, or Canvas Ammunition Pouches (MP40, MP38, or similarly styled) Worn on the left shoulder, and also on the belt. Ammo pouches may only be worn when a BFG is carried.
- Black Macrobinoculars. Styled after those used in the Special Edition, but matte black in color.
- Black ANH Stormtrooper-style ComLink
- Hinged cod/lower back pieces for mobility.
- Helmet fans and helmet cutouts for ventilation. Any cutouts must be backed with black screen so a spectator cannot see your face inside the helmet.
- Voice amplifier and/or voice effect board w/Static Burst.
- Black Hovi-Mix cast “tusks”
- Resin E11 modification kit is recommended for the Hasbro E11, to include Hengstler counter, cylinders, and spiral black wiring from counter to cylinders.
- LEDs/sound effects (for firing effect) are permitted in blasters. LEDs are NOT permitted on the costume itself.
- Black matte canvas or leather belt as an alternative to the plastic belt is permitted per FISD Elite standards.
- Armor may be slightly weathered, showing silver, grey, or black scratches. But armor must remain glossy (never matte black, ever)
- 5 ANH-style "teeth" holes on each side of the frown on the helmet. Holes must be backed with black screen so nobody can see through them.
Je retiens cela :
Citation :- Silver, battleship grey (exact match of helmet stickers), or black helmet frown.
![[Image: thex.jpg]](https://i.postimg.cc/2ys1ySdS/thex.jpg)